Setup Instructions
Instructions for using a wood burner barrel sauna
At the start of the booking:
- Locate the water tank near the chimney
- Fill it with water to the recommended level (ensure the water is not too full to avoid overflow when heating)
- Close the glass doors (This helps retain heat)
- Fully load the log burner
- Maintain the fire by adding more logs if required
- Never leave the fire unattended
- We recommend the temperature to be around 55°C-65°C.
- When using the sauna bring towels to sit down
- For a healthy experience, limit sauna sessions to 10-15 minutes at a time.
At the end of the booking:
- Always ensure the fire is fully out after use
- Empty the ashes of the log burner
- Empty the water tank
- Clean the sauna after use
A cleaning fee of £45 may be applicable if these instructions are not followed.
Instructions for using a wood burner hot tub
At the start of the booking:
- Fill the hot tub with water up to the seats
- Start the jets
- Remove the water by pulling the draining handle on the hot tub and wood burner.
- Close the water stopper
- Fill the hot tub with water, the water level has to reach the black level mark inside the hot tub at all times
- ONLY when the water level is correct can the heating start
- Fully load the log burner with wood twice
- Keep the hot tub lid closed (prevents heat from escaping and water warms up quicker)
- From time to time mix the water by starting the jets (warm water rises to the top)
- It can take 2-3 hours to heat up (depending on weather)
- The recommended water temperature is 37ºC - 40ºC
- Cold water can be poured to achieve the desired temperature if it is too hot
- To maintain the temperature place one/a few logs at a time
- The hot tub sessions should be limited if there are health concerns
At the end of the booking:
- Empty the hot tub by pulling the draining handle
- Empty the ashes of the log burner
- Rinse the hot tub/jets with water
- Leave a Google review to share your experience :)